1. The Perfect Balance of Rigidity & Flexibility for Flawless Prints
Experience the best of both worlds. Our resin is engineered to be rigid enough to hold sharp, high-resolution details, yet possesses just enough flexibility to prevent prints from becoming brittle and snapping. This unique balance ensures your delicate miniatures, thin-walled prototypes, and intricate models survive the printing process and daily handling with ease.

2. Ultra-Low Shrinkage for Unmatched Dimensional Accuracy
Achieve perfection in every dimension. Our advanced low-shrinkage formula minimizes warping and distortion during the curing process. This guarantees that your printed parts fit together perfectly the first time, which is essential for multi-part models, architectural prototypes, and any project where precise tolerances are critical.

3. Exceptionally Smooth Surface Finish, Straight from the Build Plate
Reduce your post-processing time dramatically. The resin is formulated to cure with an incredibly smooth, almost paint-ready surface. This minimizes the need for extensive sanding or priming, allowing you to go from a finished print to a beautifully painted model in a fraction of the time, while preserving all the fine details.

4. Superior Stability & Consistent Performance for Reliable Results
Trust your resin for every single print. We prioritize chemical and thermal stability, which translates to consistent viscosity, reliable layer adhesion, and predictable curing behavior across a wide range of conditions. This reliability minimizes print failures, saves you money on wasted resin, and gives you peace of mind.

5. Engineered for High-Resolution Miniatures & Detailed Prototypes
Unlock stunning detail for your most ambitious projects. Specifically formulated for model makers, this resin captures every subtle texture, sharp edge, and complex geometry with astonishing clarity. It is the ideal choice for tabletop gaming miniatures, collectible figures, and highly detailed scale models that demand the highest level of precision.

Name: Model 3D Printing Consumables

Packaging: Bottled

Weight: 1KG

Features: Balanced rigidity and toughness, low shrinkage, smoother surface, high stability

Post-printing curing process

After printing is complete, use a scraper (either a metal scraper or a material scraper) to remove the printed object from the platform.

1. First, soak the object to be printed in anhydrous ethanol solvent, old PA (isopropanol), or lactate.

2. The second step is to remove the printed object and rinse it with clean water. Then, expose it to direct sunlight, or simulate sunlight exposure for one hour, before removing it. Following these steps will yield better printing results. The specific time should be set according to your actual needs.

3. If conditions permit, irradiation with a high-temperature mercury lamp (1KW) will yield better results. Immerse the printed object in water, ensuring the water level is submerged. Irradiate for 2 minutes.

Instructions for using resin

1. Environmental requirements: Ambient temperature of 20-30℃. Do not place it near a window or other environment exposed to ultraviolet light. Also, keep it away from children and pregnant women as much as possible.

2. Shake the resin for one to two minutes before use to prevent the components from settling.

3. It is recommended to wear nitrile gloves and a protective mask when using this product, and to keep the room well-ventilated. Use with caution if you are allergic to acrylics.

4. Residual liquid on the surface of the printed resin parts can be cleaned with alcohol of 95% concentration or higher. It is recommended that the cleaning process not exceed 1 minute, as excessive cleaning time will lead to a deterioration in the structural performance of the resin parts.

5. For areas such as pores that are difficult to clean with alcohol, use ultrasonic cleaning or a syringe filled with alcohol for additional cleaning. Do not clean with alcohol too many times to ensure alcohol purity; using impure alcohol will cause whitening and incomplete cleaning. The cleaning time should be until the resin part is no longer sticky and no resin residue remains in the pores.

6. After cleaning, drain or blow dry any remaining alcohol, and place the model under ultraviolet light or sunlight, ensuring that all parts are evenly exposed until the resin surface feels dry and hard enough when scratched with a fingernail. Resin residue on the skin can be washed off with hand soap or dish soap. Try to avoid touching the resin residue washed off with alcohol with your hands.

8. If resin accidentally gets into your eyes or mouth, rinse immediately with plenty of water. If you experience any discomfort, consult a doctor immediately.

9. Skin contact with this product may cause irritation or allergic reactions. Ingestion of this product may cause severe discomfort. Prolonged exposure to this product may cause breathing difficulties. Ingestion of this product may cause breathing difficulties or allergic reactions. Keep this product out of reach of children.

Resin storage instructions

1. Store in a light-proof, sealed container at room temperature.

2. The remaining resin in the tank should not be exposed to air for a long time. If it will not be used for more than a week, it is recommended to store it separately.

3. Do not pour used resin back into unused new resin. Instead, store it in a clean container, seal it with plastic wrap, and keep it away from ultraviolet light.

4. Keep out of reach of children to prevent accidental ingestion.